热轧厂(略)产线精轧多功能仪升级改造招标公告

发布日期：(略)

招标编号：(略)

招标编号（国际招标网）：(略)

上海宝华国际招标有限公司（以下称招标机构）受欧冶工业品股份有限公司（以下称买方）委托，就其热轧厂(略)产线精轧多功能仪升级改造所需的下列货物进行公开招标，邀请合格投标人进行网上电子投标。

标段编号：(略)

标段名称：(略)

1．招标货物名称、数量、技术规格和资金来源：(略)

招标货物名称：(略)

数量：(略)

技术规格：(略)

1、投标方所投产品必须满足招标方设计的安装条件（F7出口），需自行到现场调研（可在投标前或中标后前往）。多功能仪与轧线L1、L2系统的通信协议、硬接线信号以及与AGC/APC的通信协议均维持不变，能够正常通信；按照招标方现有PI质量管控系统的通讯协议编写TM1数据文本格式包；且能接入现有的钢卷长期存储系统。

2、多功能仪具备对热轧带钢厚度、凸度、宽度、中心温度、轮廓、楔度、长度、精轧扫描温度等测量功能，并具有轮廓修正功能。

3、多功能仪配置在线4组射线及高压控制单元且具备冗余功能，不低于(略)个电离室测量通道。任何一组射线单元故障，仍能保证正常生产测量。新增加的两套带钢横断面扫描高温计及现有利旧的F7出口平直度仪、测宽仪的数据要在新多功能数据服务器存储查询并具备数据上抛接口。不论每年的钢产量是多少，其数据服务器上的存储设备应可保存至少2年的数据。且可自由导出。为方便各专业相关人员查询分析，导出数据需要多种形式：(略)

4、其它技术参数详见招标技术文件。

资金来源：(略)

2. 交货地点和交货时间：(略)

交货地点：(略)

交货时间：(略)

3.*凡确认投标的投标人请登录中国国际招标网平台（http：(略)

宝华智慧招标共享平台(https：(略)

4. 购买招标文件时间：(略)

5. 招标平台使用费：(略)

1,(略).(略)元人民币或(略).(略)美元整。

招标文件均按标段进行计价出售，投标人成功购标后，自行下载招标文件和投标文件模板。招标文件一经售出不得退还。

6. 投标截止时间和开标时间：(略)

7. 开标方式：(略)

8. 开标地点：(略)

9. *对投标人的资格要求：(略)

（1）本项目不接受代理商投标。

（2）投标人所投多功能仪设备需具有在(略)mm宽度及以上热连轧生产线,具有同样功能设备的供货业绩(一个业绩中需同时包含对热轧带钢厚度、凸度、宽度、中心温度、轮廓、楔度、长度、精轧扫描温度测量功能，对轮廓的修正功能）。

（3）投标人应具有多功能仪设备厂商出具的同意其在本项目中使用相关产品集成投标的有效授权函。

（4）投标人所提供的各种资格证书、许可证、授权证书等（在有效期内）必须真实,如有伪造、涂改、虚假,一经发现作为废标。

（5）未被国家企业信用信息公示系统(www.gsxt.gov.cn)列入严重违法失信企业名单（如适用）。

（6）未被“信用中国”网站(www.creditchina.gov.cn)列入失信被执行人名单（如适用）。

(略). 本项目不接受联合体投标。

(略).招标人相关信息：(略)

招标人联系人：(略)

招标人邮箱：(略)

招标人电话：(略)

(略). 未领购招标文件的不得参加投标。

(略). 客服热线：(略)

传 真：(略)

网上购标方法：(略)

项目经理：(略)

电 话：(略)

电子邮件：(略)

业务咨询：(略)

招标机构地址：(略)

购标时人民币付款采用第三方支付，外币付款可以汇款到相应外币账户内

开户银行（外币）：(略)

收 款 人：(略)

账 号：(略)

美元：(略)

Swift Code：(略)

Upgrading & Renovation Project of (略)mm HSM Finishing Mill (FM) Multi-function Measuring Instrument

Issue Date：(略)

Tendering No：(略)

Tendering No. (China International Bidding Website)：(略)

Shanghai Baohua International Tendering Co., Ltd.(Hereinafter referred to as Tendering Agency) is commissioned by Wuhan Iron & Steel Co., Ltd(Hereinafter referred to as tenderer) on Open Tendering for the following goods required in Upgrading & Renovation Project of (略)mm HSM Finishing Mill (FM) Multi-function Measuring Instrumentinvites eligible bidders to online e-bidding.

Bid section No：(略)

Bid section Name：(略)

1． The name, quantity, technical specifications and fund sources of goods for tendering：(略)

The name：(略)

Quantity：(略)

Technical specifications：(略)

（1）The tenderer shall conduct on-site research by himself to meet the installation conditions (F7 exit) designed by the tenderee (before or after the bid). The communication protocol between the multi-function measuring instrument and the rolling line L1, L2 system, the hardwired signal and AGC/APC shall remain unchanged and can communicate normally. The tenderer shall compile .TM1 data text format package which can be connected to the existing coil long-term storage system according to the communication protocol of the existing PI quality control system.

（2）The multi-function measuring instrument has the function of measuring thickness, crown, width, center temperature, profile, wedge, length, finishing scanning temperature of hot rolled strip as well as the function of profile correction.

（3）The multi-function measuring instrument is equipped with 4 in-line ray and high voltage control units with redundancy and more than (略) ionization chamber measurement channels. Normal production measurement can be ensured if any group of ray unit failure. The data of the newly added two sets of strip cross-section scanning pyrometers and the exiting F7 exit flatness meter and width meter are stored and queried in the new multi-function data server which has the data uploading interface. Regardless of the annual steel production, the storage device on the data server should be able to store data for at least 2 years and can freely export data. In order to facilitate the query and analysis of relevant professionals, the exported data needs a variety of forms：(略)

（4）Refer to the bidding technical documents for other requirements.

Fund sources of goods：(略)

2. Delivery time and place：(略)

Delivery time：(略)

Delivery place：(略)

3. *The bidders who have confirmed to participate the bid must log on China International Bidding Website (http：(略)

Baohua E-bidding website (http：(略)

4. Time for purchasing Tendering documents：(略)

5. Sales prices of the tendering document：(略)

All tendering documents will be sold per bid package (or section). After purchasing the bid, the bidder can download the tendering document and the template of bidding document. The tendering documents sales are non-refundable.

6. Deadline for bid submission and Bid Opening Time：(略)

7. Bid opening method ：(略)

8. E-bid opening place：(略)

9. *Requirements of Bidder’s qualification：(略)

（1）This project does not accept bidding by agents.

（2）The tenderer's multi-function measuring instrument shall have the application performance in the production line of (略)mm or above hot strip mill (HSM) or the equipment with the same function, and the performance description submitted by the tenderer shall contain the measurement functions that have been put into use in the reference plant on the thickness, bulge, width, center temperature, profile, wedge, length, finishing mill (FM) scanning temperature of the hot rolled strip, as well as the correction function of the profile.

（3）The tenderer shall have a valid letter of authorization issued by the manufacturer of the multi-function measuring instrument to approve the use of relevant products in this project for integrated bidding.

（4）The various qualification certificates, licenses, authorizations, etc. provided by the tenderer should be within the validity period and must be true. The tenderer will be rejected if they are found to be forged, altered or false.

（5）Not included in the list of enterprises with serious illegal and dishonest acts in National Enterprise Credit Information Publicity System (www.gsxt.gov.cn) (if applicable).

（6）Not included in the credit rating blacklist in Credit China (www.creditchina.gov.cn)(if applicable).

(略). This project consortium bidding is not accepted

(略).Information about the tenderer：(略)

Tenderer contact：(略)

Tenderer's mailbox：(略)

Tenderer telephone：(略)

(略). Tel：(略)

Fax：(略)

Online tendering document purchase：(略)

Bid manager：(略)

Tel：(略)

E-mail：(略)

Bussiness Consulting Tel：(略)

Bid agency address：(略)

When purchasing the tendering document, the payment in RMB shall be made by the third party, and the payment in foreign currency can be remitted to the corresponding foreign currency account.

Bank account：(略)

Beneficiary：(略)

Account Number

USD：(略)

Swift Code：(略)